MAKTAPE
Home
»
Drip irrigation tape
»
MAKTAPE

Introducing MAK Tape

MakTape performs the best irrigation quality. It is the only drip tape, which can provide 0.2 litre per hour per dripper at 0.5 bar pressure. With outlets every 10 cm it is possible to install one line up to 250 m for the 16.5 mm drip tape diametre, and up to 450 m for the 22.5 mm drip tape diametre. These leads to perfect distribution of water for short irrigation time with uniformity of 90% from the beginning till the end of the line. 
Nevertheless the small flow rate, it is not necessary to use special filters with high mesh to prevent clogging. It is recommended using standard disk or screen filters with 120 mesh. 
MakTape is produced by a special blend of raw materials, which makes the product physically much stronger than other tapes and pipes with similar wall thickness.
 

MAKTAPE

DRIPPING SPACE: 10 CM
FLOW RATE: 2 - 4 - 8 lt / mt / h
DIAMETERS: 16,5 - 22,5 mm
WALL THICKNESS: 6 mil / 150 mic - 8 mil / 200 mic - 10 mil / 250 mic - 12mil / 300 mic

MAKTAPE


DRIPPING SPACE: 20 CM
FLOW RATE: 5 lt / mt / h
DIAMETERS: 16,5 - 22,5 mm
WALL THICKNESS: 6 mil / 150 mic - 8 mil /200 mic - 10 mil / 250 mic - 12 mil /300 mic

INNOVATION AND BENEFITS

• Drip irrigation tape MAKTAPE is produced only with high quality raw material
• High reliability and lower sensitivity of dripper clogging. 22 large size dripper inlets and 4 outlets
• Recommended filtration 120 mesh
• The dripper at 10 or 20 cm quarrantee an optimal distribution of water and fertilizers
• Mechanical strength and higher resistance to soil insects
• Ideal preservation of moisture at the roots of crops
• Large and complete range

WORKING PRESSURE
410 mil/micron 6/150 8/200 10/250 12/300 820 mil/micron 6/150  8/200 10/250 12/300
ф16,5mm 0,8 1 1,3 1,5 ф16,5mm 0,8 1 1,3 1,5
ф22,5mm 0,6 0,7 0,9 1,2 ф22,5mm 0,6 0,7 0,9 1,2

 

PACKAGING
LENGTH OF METERS PER ROLL

410 mil/micron 6/150 8/200 10/250 12/300 820 mil/micron 6/150  8/200 10/250 12/300
ф16,5mm 2700 2000 1700 1200 ф16,5mm 3000 2300 1700 1200
ф22,5mm 2200 1700 1500 1200 ф22,5mm 2200 1700 1500 1200

 

RECOMMENDED LENGTH OF LINE

410
(-1%)
(0%)
(+1%)
bar 0,5 0,75 0,9 1 0,5 0,75 0,9 1 0,5 0,75 0,9 1
ф 16,5 mm - 2 l/h 230 241 247 252 196 202 215 235 135 145 150 155
ф 16,5 mm - 4 l/h 167 170 173 177 138 142 146 150 98 95 100 105
ф 16,5 mm - 8 l/h 90 92 96 99 78 80 81 85 50 55 58 60
ф 22,5 mm - 2 l/h 464 480 487 495 415 430 436 446 290 300 305 310
ф 22,5 mm - 4 l/h 272 282 286 291 249 258 261 266 216 223 227 231
ф 22,5 mm - 8 l/h 160 164 168 173 133 137 139 143 86 94 99 102

 

820
(-1%)
(0%)
(+1%)
bar 0,5 0,75 0,9 1 0,5 0,75 0,9 1 0,5 0,75 0,9 1
ф 16,5 mm - 5 l/h 158 162 163 165 128 130 132 134 82 90 97 105
ф 22,5 mm - 5 l/h 250 255 258 265 235 239 242 250 200 203 206 215


FLOW CHARTS